Overview Features:
To see if dampers really have the vent area they claim to have, they need to be tested and this model does that really well. It not only has lots of flow but can create 100s of Pa to see at what point the Pressure Relief Vents actually open. Then it will test the vent path to ensure the peak pressure evaluation complies with the standard.
Sufficient power also to test larger enclosures and an ideal place to start since it can be easily upgraded to the full feature 6210F when you want to measure the lower leak which often is the only way to pass many enclosures.
Test for hold times in flooded volumes up to 51,000 cu ft (1450 m3) for Inert agents and 106,000 cu ft (3000 m3) for halocarbon chemical agents.
Testing pressure relief vents will require more power. This system will test the venting for a volume up to a maximum of 12,000 cu ft (330 m3) for Inert agents although vents up to 8 sq ft (0.8 m2) can be measured individually.
Request literature on all of Retrotec systems to determine the size of enclosures that can be tested with each system.
Include Items
● 1 x DM32 WiFi Digital Gauge Package
DM32 WiFi Dual Channel Color Touchscreen Manometer
USB Cable, 6' (1.8 m)
Cat5 Cable, 7' (2 m) Blue
DM32 USB Charging Module (120V/60Hz, 240V/50Hz, or 110V/50Hz)
Gauge Case
DM32 Magnetic Clip
ISO17025 calibration of DM32
Gauge Calibration Verification Report
● 1 x 6000 Series Fan Set
Fan set contains:
6000 Series Calibrated Fan
High Power Drive for 6000 Series Fan
(120V/60Hz, 240V/50Hz, or 110V/50Hz)
Range Ring A for 5000/6000 Series Fan
B8 Plate for 5000/6000 Series Fan
8 x 4" Blank Plugs
Ranged 74, 47, & 29
2 x Fan Cover
System Calibration Verification Report
